Related Manuals for I-novative 100BASE-T1
Summary of Contents for I-novative 100BASE-T1
-
Page 1: User Manual
User Manual 100BASE-T1 Media Converter 100BASE-T1 Media Converter User Manual Rev. 1.0 01/31/18 1 / 7... -
Page 2: Table Of Contents
6.2 Firmware..........................6 7 Important Information........................6 7.1 Packaging Ordinance......................6 7.2 Recycling Reference and RoHS Compliance.................7 7.3 CE Marking..........................7 8 Manufacturer and Support......................7 9 Warranty............................7 100BASE-T1 Media Converter User Manual Rev. 1.0 01/31/18 2 / 7... -
Page 3: Introduction
• 100BASE-TX: Microchip KSZ8081 Intended Purpose and Disclaimer The 100BASE-T1 Media Converter is intended to be used for development and testing purposes in automotive or industrial areas. It is not allowed to use the 100BASE-T1 Media Converter in series products. -
Page 4: Main Connector
Cu, unshielded, AWG25 FLRY 2x0,35-B RD/BL Leoni 2x0,35mm2 Cu, unshielded, AWG22 Power FLRY-B 1x0,35 RD Leoni 1x0,35mm2 Cu, unshielded, AWG22 Supply FLRY-B 1x0,35 BL Leoni 1x0,35mm2 Cu, unshielded, AWG22 100BASE-T1 Media Converter User Manual Rev. 1.0 01/31/18 4 / 7... -
Page 5: Configuration
The auto role switch feature can increase the link setup time. Do not connect the 100BASE-T1 interfaces of two Media Converters with auto role switch turned on on both sides. This may prevent the link establishment. Software 6.1 User Interface... -
Page 6: Controller Functions
Adjustment via register access will have only a transient effect. 6.1.3 100BASE-TX Functions Except fot the SQI, the Ethernet PHY functions are identical to the ones of the 100BASE-T1 PHY. grated KSZ8081MNXIA can be retrieved from the chip The register set description of the inte vendor Microchip (http://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8081MNX-RNB.pdf). -
Page 7: Recycling Reference And Rohs Compliance
„Restriction of use certain dangerous substances“). 7.3 CE Marking The i-novative 100BASE-T1 Media Converter has the CE mark. This device complies with the requirements of EU Directive: 89/336 / EC Directive on electromagnetic compatibility and the mutual recognition of their conformity.
Need help?
Do you have a question about the 100BASE-T1 and is the answer not in the manual?
Questions and answers