Table of Contents
Advertisement
Name
On power-up load settings from:
Ethernet Switch
(A) EEPROM (user/factory configuration)
Settings
or
(B) Fail-safe factory
Future Use – Factory Reserved Parameters (Software)
IP address
Subnet
Reserved
Gateway
Network
Primary DNS
Secondary DNS
Reserved
Enable / Disable
DHCP
* Unique IP addresses should be assigned / configured for each MES card used on the same network.
Focal Technologies Corporation
A Moog Inc. Company
Parameter
Model 922-MES – User Manual
Default Setting
Option A
192.168.0.201*
255.255.255.0
192.168.0.1
194.25.2.129
194.25.2.130
Disable
Document No. 922-0662-00, Rev 1.0
Page 4-3
Advertisement
Table of Contents
