Alcatel-Lucent 7710 SR OS Interface Configuration Manual page 398

Show Commands
pvt
Syntax pvt [vpi.vpi] [detail]
Context show>multilink-bundle>ima>atm
Description This command displays ATM port PVT information.
Parameters vpi — Displays the VPI values.
detail — Provides detailed information.
Output Show Mutlilink-bundle IMA ATM PVT Output — The following table describes show
multilink-bundle IMA ATM port-connection output fields.
Sample Output
A:ima2# show multilink-bundle bundle-ima-1/1.1 ima atm pvt
================================================================
ATM PVTs, Port bundle-ima-1/1.1
================================================================
VPI Range
----------------------------------------------------------------
4.5
================================================================
A:ima2#
Page 398
Values
vpi: 0 — 4095 (NNI)
0 — 255 (UNI)
MDA Values
1, 2
Label
VPI Range
Owner
Type
Ing.Td
Egr.Td
Adm
Opr
Owner Type
SAP PVT
Displays the VPI range:
Identifies the system entity that owns a specific ATM connection.
Specifies the type of this multilink bundle.
mlppp — Indicates that the bundle is of type MLPPP.
ima — Indicates that the bundle is of type IMA group.
Specifies the ATM traffic descriptor profile that applies to the receive
direction of the interface connection.
Specifies the ATM traffic descriptor profile that applies to the transmit
direction of the interface connection.
ima — Indicates that the bundle is of type IMA group.
Down — The bundle is administratively down.
Up — The bundle is operationally up.
Down — The bundle is operationally down.
Ing.TD Egr.TD Adm
1 1 up
7710 SR OS Interface Configuration Guide
Description
Opr
up