Table of Contents
Advertisement
User Manual V2.4
2 mniksol –WIFIKIT User Manual
2.1
Unpack
After unpacking the box, please check the parts according to the below list. Contact the
manufacturer immediately, should you find any damage, missing or wrong model of the
device or any parts.
Serial
Name
A
PV data collector
B
Power supply adapter
C
screw
D
expanded rubber tube
E
manual
2.2
The installation of data collector
2.2.1 Wall-mounted installation
1. Mark two horizontal round holes which distance is 69mm in the selected position
2. Drill two φ6mm holes in the marked position, the depth of the hole is not less than 30mm
3. Punch the expanded rubber tubes into the holes lightly with a rubber hammer
4. Wring two screws into the expanded rubber tubes, the screws head exposed wall about
6cm
5. Hang the PV data collector WIFIKIT on the screws，hold the metal part of the antenna
and rotate the antenna to a wanted position
2.2.2 Horizontal data collector installation
Lay the data collector on a flat surface
Note1: The protection level of PV data collector WIFIKIT is IP21. It cannot be installed outdoors or in the
Quantity
Model
1
WIFIKIT
1
FY0502000
2
--
2
--
1
--
Picture 2.2.1
Picture 2.1.1
5
Advertisement
Table of Contents
