Table of Contents
Advertisement
Left button"Apply"
Note: this default setting is router DHCP is on, if you can not connect to the network, please check if you
open the DHCP function.
2.4.2 Wired network
As the picture 2.4.2, you can use network cable to connect to the Ethernet port of WIFIKIT
and the port of router. Then the inverter info received by WiFi will be directly transferred to
the remote server.
Note: the default WIFIKIT is WiFi network, if use the Ethernet port, please restore to the factory default
status.
12
Do not fill in
Fill in the password of your wifi
Whether display your password
"Disable"or"Enable" ，
"Enable"suggested
Picture 2.4.1
User Manual V2.4
Advertisement
Table of Contents
