Wifi Settings; Wireless Network - Omnik Omniksol-WIFIKIT User Manual

2. Insert the network cable into anyone RJ45 port on anyone inverter
3. Insert the other network cable into anyone RJ45 port on second inverter
4. Make the needed monitoring inverters in series in the same way
5. Connect the PV data collector WIFIKIT to a inverter with the bus, （ constitute serial
LAN）
6. Connect the power supply adapter to data collector, then insert into the socket
Note: Must cut off the power supply before connection. Please make sure that all the connections are
completed, and then power the inverters and PV data collectors. Otherwise may cause personal injury or
equipment damage.
2.4

WiFi settings

2.4.1 Wireless Network

8
Picture 2.3.3
User Manual V2.4
Insert the wifi part, turn on
DC power, 3minutes later
continue the next part