Lenovo ThinkPad 10 20E3 User Manual page 36

Installing a battery to power the pen
Depending on the model, your pen might not be installed with a battery. To install an AAAA alkaline battery,
do the following:
1. Unscrew the end cap.
2. Insert an AAAA alkaline battery into the battery compartment.
3. Reinstall the end cap.
4. Tighten the end cap.
Using the pen holder to store the pen
Your tablet might be shipped with a pen holder. Use the pen holder to store the pen on your tablet by
doing the following:
1. Insert the pen holder into the USB 3.0 connector on your tablet.
2. Insert the pen into the pen holder horizontally or vertically.
24
ThinkPad 10 User Guide