To Activate The Child Lock - Beko BFL853ADW User Manual

C
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine
again, programme will resume from where it has stopped.
When the Child Lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be canceled if
the buttons are pressed five times consecutively.

To activate the Child Lock:

Press and hold Auxiliary Function button 2 for 3 seconds. After the countdown as "CL 3-2-1" on the
display is over, "CL On" symbol appears on the display. Release Auxiliary Function button 2 when this
warning is displayed.
To deactivate the Child Lock:
Press and hold Auxiliary Function button 2 for 3 seconds. After the countdown as "CL 3-2-1" on the
display is over, "CL Off" symbol disappears.
• AntiCrease+
This function is selected when the 4th auxiliary function is pressed and held for 3 seconds and the programme
follow-up light for the relevant step turns on. When the function is selected, the drum rotates for up to 8 hours
for preventing the laundry from creasing at the end of the programme. You can cancel the programme and
take your laundry out at any time during the 8-hour duration. Press the function selection key or the machine
on/off key to cancel the function. The programme follow-up light will remain on until the function is canceled
or the step is complete. If the function is not cancelled, it will be active in the subsequent washing cycles as
well.
• Auto Dosing Setting
You can enable this function by pressing the auxiliary function key 3 for 3 seconds. With this function, the
dosing amounts of the Liquid Detergent and Softener are changed.
Changing the dosing amounts of Liquid Detergent and Softener:
Washing Machine / User's Manual
• Press and hold Auxiliary Function button 3 for
3 seconds.
• You can press the "Temperature" selection
button( ) to change the liquid detergent
dosing levels as below.
1: Low
2: Medium
3: High
• You can press the "Spin" selection button (
)to change the softener dosing levels as
below.
1: Low
2: Medium
3: High
23 / EN