Remote Control Effective Range; Replacing The Remote Control Batteries - ViewSonic PX706HD User Manual

• 3D
Displays the 3D Settings menu.
• Pattern
Displays embedded test pattern.
• Blank
Hides the screen picture.
• (Volume Up)
Increases the volume level.
• (Volume Down)
Decreases the volume level.
• (Mute)
Toggles the projector audio between on and
off.
• Brightness
Displays the brightness adjustment bar.

Remote control effective range

Refer to the illustration about the location of the Infra-
Red (IR) remote control sensor(s). The remote control
must be held at an angle within 30 degrees
perpendicular to the projector's IR remote control
sensor(s) to function correctly. The distance between
the remote control and the sensor(s) should not exceed
8 meters (~ 26 feet).
Make sure that there are no obstacles between the
remote control and the IR sensor(s) on the projector
that might obstruct the infra-red beam.

Replacing the remote control batteries

1. To open the battery cover, turn the remote control over to view its back, press on the
finger grip on the cover and slide it down in the direction of the arrow as illustrated.
2. Remove any existing batteries (if necessary) and install two AAA batteries observing
the battery polarities as indicated in the base of the battery compartment. Positive (+)
goes to positive and negative (-) goes to negative.
• Contrast
Displays the contrast adjustment bar.
• Color Temp
Displays the Color Temp. menu.
• Sports
Selects the Sports mode.
• Movie
Selects the Movie mode.
• Gaming
Selects the Gaming mode.
• Eco Mode
Displays the lamp mode selection bar.
• Standard
Selects the Standard mode.
• Audio Mode
Selects the audio mode.
10