Tait Orca 5010 Servicing Manual

Servicing Tait Orca 5000 handportables
The Tait Orca 5000 series of handportables is a
range of high performance, microprocessor-
controlled radios manufactured using an RF-
shielded PCB and high-density SMD compo-
nentry.
The manufacturing process does not allow
direct servicing access to components on the
main PCB, although replacement PCBs are
available on an exchange basis. Service repairs
of Tait Orca 5000 handportables are therefore
limited to key mechanical and ancillary devices
associated with the main PCB. These include:
the front panel assembly;
the lens (Orca 5020, Orca 5035 and Orca
5040);
the PTT keypad;
the speaker;
the keypad;
the LCD display (Orca 5020, Orca 5035
and Orca 5040);
the shield, complete with user interface
PCB assembly and polyester dome (Orca
5020, Orca 5035 and Orca 5040);
the main PCB assembly;
the antenna connector;
the channel selector switch;
the volume control switch;
the microphone;
the speaker contacts;
the battery contacts;
the PTT tact switch;
the RF out assembly; and
the auxiliary flexible PCB.
The repair of PCB-related faults is the respon-
sibility of the Customer Services Division of
09/01 IPN: M5000-00-102
Tait Electronics Ltd. Detailed schematics and
component location information for the main
PCB may also be obtained from the Customer
Services Division. Contact your Tait dealer for
more information.
WWW technical support
Tait Electronics Ltd provides product support
at the following address:
http://www.taitworld.com/support
At this site, you can send a request for support.

What does this manual contain?

This manual is supplied as part of the Tait Orca
5000 handportable service kit (TOPA-SV-
117), and provides the following:
general information and specifications on
the Tait Orca 5000 series of handporta-
bles;
basic circuit descriptions;
information on finding and servicing of
non-PCB-related faults;
information on Tait Orca 5000 battery
packs and chargers;
information on interfacing accessories to
Tait Orca 5000 handportables; and
a glossary of key terms.
What is included in the calibration
service kit?
The TOPA-SV-117 service kit contains:
calibration test unit (TOPA-SV-004);
radio calibration cable for connecting the
radio to the calibration test unit (TOPA-
SV-007);
25 pin RS232 to modular phone jack
Servicing Tait Orca 5000 handportables A - 3