Table of Contents
Advertisement
DT-X100 Hardware Manual
3.2.2. Ethernet Cradle/ USB Cradle
No
Name
1 USB Client Port
2 USB Host Port
Power Switch
3
（HA-F60IOA/HA-F62IOA only）
Selector Switch
4
（HA-F60IO/HA-F60IOA
HA-F62IO/HA-F62IOA only）
LAN Connection Status
5
LED
（Ethernet Cradle only）
LAN Communication Status
6
LED
（Ethernet Cradle only）
LAN Port
7
（Ethernet Cradle only）
8 AC Adaptor Jack
9 Terminal Detect Switch
10 Power Contacts
11 Communication Terminal
12 Power LED
Mount Hooks
13
（HA-F60IOA/HA-F62IOA only）
This port is used to transmit data and fi les (download, upload) by connecting the
Ethernet Cradle to a PC using a USB cable (DT-380USB-A). The dedicated driver
must be installed in the PC before connecting the Ethernet Cradle to the PC.
This port is used to connect a corresponding USB peripheral device.
Turns the power on and off.
This switch is used to switch between a USB connection and a LAN connection.
A:USB host B:USB Client
This LED shows the status of the LAN connection.
Off: LAN cable not connected correctly.
Lit green: LAN cable connected correctly.
This LED shows the LAN operation status.
Off: No communication.
Blinking green: Communication in progress.
This LED shows the LAN operation status.
Off: No communication.
Blinking green: Communication in progress.
Connect the AC adaptor here.
This switch detects when the DT-X100 is seated correctly on the Ethernet Cradle.
Power is supplied to the DT-X100 via these contacts.
Used for communications.
This LED indicates the power status and the mounting status of the DT-X7.
Off: Power off
Green: Power on, DT-X100 mounted correctly
Red: Power on, DT-X100 not mounted
Use these hooks to lock the DT-X100 into the Ethernet cradle.
CASIO COMPUTER CO., LTD.
Description
P.20
Advertisement
Table of Contents
