Casio DT-X100-10E Hardware Manual page 19

DT-X100 Hardware Manual
No. Name
1 Indicator 1
2 Indicator 2
3 Speaker
4 Power Key
5 Protector
6 Screen
7 Trigger Center Key
8 Cursor Keys
9 Enter Key
10 Numeric Keys
11 Fn Key
12 CLR Key
13 Function Keys
14 Microphone
15 Trigger R Key
16 Trigger L Key
17 Barcode Reader Port
18 IR Port
19 Power Contacts
20 Data Communication Terminal
21 Strap Holes
22 Reset Switch
23 Hand Belt Holes
24 Battery Pack Cover Lock
25 Battery Pack Cover
26 Mount Holes
Orange: Charging the battery pack.
Green: Charging the battery pack is complete.
Red: Battery pack error or the surrounding temperature is out of the charging
temperature range.
Flashes in blue when operating via Bluetooth or in orange when operating via
WLAN.
Lights in green when reading a bar code successfully.
Buzzer and voice messages are output here.
Turns the power on and off.
Protector
Displays text and operating instructions
Used to perform bar code reading. Can be assigned an arbitrary function.
Perform the same functions as the up and down arrow keys on a PC keyboard.
Press when fi nishing entering numerical values or when moving to the next step.
Used to enter numeric values and decimal points.
Used to make various settings in combination with the function keys or numeric
keys or when starting a pre-registered application.
Used to clear one letter to the left of the cursor.
Various functions other than bar code reading can be assigned to
these keys.
The default key assignments are as follows.
F1: Similar function as the Alt key on a PC keyboard.
F2: Similar function as the Shift+Tab keys combination on a PC
keyboard. Used to move the cursor among entry or selection
items.
F3: Similar function as the Tab key on a PC keyboard. Used to
move the cursor among entry or selection items.
F4: Not assigned.
F5: Enter a space.
F6: Similar function as the cursor left key on a PC keyboard.
F7: Similar function as the cursor right key on a PC keyboard.
F8: Select text entry mode.
(The mode changes in order of Numeric ➝ Uppercase letter ➝
Lowercase letter)
Used to input a sound including voice.
Used to perform bar code reading.
Used to perform bar code reading.
Laser light or LED light is emitted from this window that reads bar codes.
Used for communication with IrDA Printer.
Used to receive power provided by the USB Cradle or Ethernet Cradle.
Used for data communications.
Used to attach the hand strap. Also used for the hand belt.
Used to reset the Handheld Terminal.
Used to attach the hand belt.
Used to lock the battery cover and to release.
Used to cover the battery compartment that holds the battery pack inside.
These holes hold the terminal seating in the optional USBCradle or in the Ethernet Cradle.
CASIO COMPUTER CO., LTD.
Description
P.19