B-mil
Display TRUE if diagnostic lamp is activated, engine not running always TRUE
B-milspec
Display TRUE if customer specific parameter exceeded
GT3 RSR -> fuel pressure, water temperature, oil temperature
B-oellamp
Display TRUE if oil pressure warning lamp is activated
phase test
When cylinder 1 identified -> display 1-0-1-0-1-0...
phspos_w
if display < 25° at idle speed and/or < 27° - 30° at full throttle (data recording) -> angle
between crankshaft and flywheel not OK
Diagnostic lamp
Customer diagnostic lamp
Oil pressure warning lamp
Map-position
66
Cylinder 1 sensor
Angle cyl 1 and TDC