Gearbox Assembly - Porsche 911 GT3 Cup 2008 Technical Handbook

Gearbox assembly:

nd
Fit the splined 2 gear and the 3
to the input shaft before pushing the complete shaft through
the mounting plate.
Clamp the input shaft using the special tool.
Tighten the collared input shaft nut to 220 Nm.
Bolt together the split input shaft and fit the sliding sleeve and
circlip.
Fit the selector rod with the 3
cam follower into selector barrel track.
Push the pinion gear shaft into the mounting plate.
th
Fit the splined 4 gear wheel to the pinion gear shaft.
rd th
Attention: The 3 /4 fixed gear wheel is not symmetrical
and must be mounted with the raised surface facing the
mounting plate.
Mount the gear selector barrel-drive in position before fitting
the mounting plate.
rd th
and 4 idler gear wheels etc
rd th
/ 4 selector fork and push the
22