Porsche 911 GT3 Cup 2008 Technical Handbook page 30

Mount the cut away
996.450.319.9A
th
Fit the splined 6 gear spacer hub and the 6
wheel, guide hub, dog-ring, selector fork and 5
wheel to the pinion gear shaft. Fit the splined 5
the input shaft.
Fit the reverse gear and afterwards the selector fork.
Tighten the collared input shaft nut to 220 Nm torque.
Tighten the collared pinion shaft to 330 Nm torque.
th th
Secure the 5 / 6 gear selector fork with the roll-pin.
Attention: When pressing in the roll-pin always support
the selector fork with special tool 996.450.315.9A.
gear cluster housing.
th
gear idler
th
gear idler
th
gear wheel to
25
Part