Print Log Procedure; Enter Access Mode; Return To Normal Display Mode - Pneumercator TMS 3000 Quick Reference Manual

L
E
G
Press and release.
E
N
D
1.
While holdin g the TEST button, hold the MODE button until
2.
EDIT
LIne Leak
Leak Hist
tank Leak
or
deLivery
Inventory
Note: the list of logs may vary with the version of firmware in the TMS.
3.
STEP
or
TMS Quick Reference.doc

Print Log Procedure

Enter Access Mode

Log Log Log Log
,
rEturn
Events
ALarms
Water
Orders
,
tHefts
saLes

Return to Normal Display Mode*

Return Return
Return Return
,
EDIT
Return Return Return Return
,
Return Return Return Return
,
Press and hold
until second beep.
Log Log
Log Log
Print Log(s)
Inventory Inventory Inventory Inventory
selected log
selected log
Log Log Log Log
normal mode
Page 2 of 2
Inventory Inventory Inventory Inventory
Flashing Display
is displayed, then release buttons.
Inventory Inventory Inventory Inventory
,
EDIT
xxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxx
PRINT
xxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxx
,
xxxxxxxxxxxxxxxxxxxxxxxxxxx
selected log
,
EDIT
,
EDIT
*Return to normal tank gauging
display mode may also be achieved
by allowing console to timeout for
four minutes with no pushbutton
activity.
Log Log Log Log
July 1, 2009