Operating Instructions - Qsonica SONICATOR S-4000 Operation Manual

6. Operating Instructions

Your new Ultrasonic Liquid Processor has been designed with a color ¼ VGA LCD user
interface with touch screen capabilities. All program and run functions are controlled through
the touch screen panel.
1. Answer the Microtip
Microtip . If you are not familiar with the Microtips
™
QSonica for help.
Warning: Improper selection may result in tip damage or poor sonication.
2. Select the Mode of Operation or access Options screen.
a. Manual Mode: Selecting Manual Run allows the user to set the sonicator
output level manually (setting 1 – 100%). Starting and stopping the ultrasound
output is also manually performed.
b. Program Mode: Allows the user to program specific On / Off times at any
programmed output setting. The ability to save up to 10 programs and
sequence several individual programs together can also be performed in this
mode.
c. Options: Allows the user either select footswitch mode of operation, change
display contrast, and select either ºC or ºF if temperature monitoring is
enabled. Footswitch and temperature probes are optional items and are not
shipped unless specifically ordered with the unit.
In addition, the Sonicator has diagnostic capabilities. In the event of a fault, an appropriate
message will appear and give instructions to perform a diagnostic test. It is recommended to
perform the diagnostic test each time a fault occurs in order to resolve the problem.
Please review the sample screens and information on the following pages for assistance with
operating the Sonicator.
Question, Yes or No. See page 13 and 25 for an image of a
™
15
and need assistance, please call
™