Advertisement
PAIRING YOUR STEREO HEADPHONES
Notes:
• Range is 33 feet (10 meters)
• Supports easy pairing
• Prompts you by saying "Your device is connected, " when connected
• Supports a battery indicator icon on an iOS device
Pairing with a cell phone or MP3 player
1 With your stereo headphones turned off, press and hold
for
four seconds. The blue and red LEDs blink alternately.
2 On your phone or MP3 player, select INSIGNIA NS-CAHBTOE01
from the list of discovered devices, then enter the password 0000
(four zeros) (if required) to pair your headphones.
For more information on pairing Bluetooth devices to your cell
phone or MP3 player, see the device' s documentation.
Note: After the headphones have been successfully paired with the cell
phone or MP3 player, the headphones will automatically reconnect to the
phone or MP3 player.
Pairing with a computer running Windows
Note: Before you pair the headphones with the computer, make sure that the
computer is equipped with Bluetooth. Refer to the computer' s documentation
or contact the computer manufacturer for more information. If your computer is
not Bluetooth compatible, install a Bluetooth USB adapter (dongle).
1 Turn on Bluetooth on the computer. For instructions, see the
computer' s documentation or contact the computer manufacturer.
2 Double-click the Bluetooth icon in the system tray, then click Add
a device (Add Wireless Device using Windows Vista).
3 With the headphones turned off, press and hold
for four
seconds. The LED blinks blue and red alternately. Pairing mode is
activated.
4 Double-click the INSIGNIA NS-CAHBTOE01 icon on the computer
or highlight the icon, then click Next.
Note: If you are unable to locate the INSIGNIA NS-CAHBTOE01 icon, click
the Search Again button.
5 If required, enter 0000 (four zeros) in the Bluetooth security
code field, then click Next.
6 After the headphones have been paired, click Close.
Note: To make your headphone the default playback device, refer to the User
Guide.
Pairing with a Mac computer
Note: Before you pair the headphones with the computer, make sure that the
computer is Bluetooth compatible. Refer to the computer' s documentation or
contact the computer manufacturer for more information. If your computer is not
Bluetooth compatible, install a Bluetooth USB adapter (dongle).
1 Turn on Bluetooth on the computer. For instructions, see the
computer' s documentation or contact the computer manufacturer.
2 Click the Bluetooth status menu.
3 Click Set up Bluetooth Device. The Bluetooth Setup Assistant opens.
4 Click Continue.
5 Select Headset as the device type, then click Continue.
6 With the headphones turned off, press and hold
for four seconds.
The LED blinks blue and red alternately. Pairing mode is activated.
7 Select INSIGNIA NS-CAHBTOE01, then click Continue. The
computer gathers information.
8 Click Continue.
9 Enter 0000 (four zeros) into the Passkey field, then click Continue.
10 Click Quit to finish.
Note: To use the headphones, they must be selected as the default input and
output device on the computer.
11 Click System Preferences, then click Sound.
12 Under Input, select INSIGNIA NS-CAHBTOE01, then under
Output, select INSIGNIA NS-CAHBTOE01.
For more information on using your headphones with Skype, refer to
your User Guide.
RESETTING YOUR STEREO HEADPHONES
• To reset your headphones, with your stereo headphones turned off,
press and hold the power button for five seconds. The LED blinks red
ten times, indicating that your headphones have entered pairing
mode.
SPECIFICATIONS
Bluetooth version:
Bluetooth 4.1
Supported profiles:
A2DP, AVRCP, HFP, HSP
Frequency spectrum:
2.4 ~ 2.4835 GHz ISM Band
Working distance:
Up to 33 ft. (10 m)
Operating temperature:
23 ~ 122° F (-5 ~ 50° C)
Operating time:
Talk: 10 hours
Music: 10 hours, playback music track
Standby time:
Up to 200 hours
Size:
6.3 × 2.9 × 7.1 inches
(16.1 × 7.3 × 18.0 cm)
Weight:
6.42 oz (182 g)
Average charging time:
Two hours
TROUBLESHOOTING
• Reset your BT headphone
• Plug in the micro USB cable for charging
LEGAL NOTICES
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
FCC Statement:
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try and correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RSS-Gen & RSS-247 Statement:
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
RSS-102 Statement
This equipment complies with Industry Canada radiation exposure limits
set forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry
Canada limites établies pour un environnement non contrôlé.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
IINSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 16-1055
Advertisement
