Do you have a question about the BG-300E and is the answer not in the manual?
Questions and answers
Omar
May 21, 2025
Hi we have problem with grinder BG-300E we get new computer and put it back make sure all wires looks alright but when turn on on the screen show E-08 and red led on the computer blinks can help with this troubleshooting code
Only authorized and trained personnel may operate this machine. 2. Machine Description The BG-300E is an electric driven floor grinding machine for treating horizontal surfaces, especially for edge grinding. ▪ Closed circuit which is almost dust free, when connected to an appropriate Diamatic dust collector.
4. Turn on dust collector; 5. To turn on BG-300E. Pull out emergency button, turn on the switch to start the machine. 6. Rotate the potentiometer to adjust the rotation speed of grinding disc. Speed adjustable range is 0 –...
Store the cleaned and dry machine in a dry and humid free room. Protect the electrical motor from moisture, heat, dust and shocks. All repair work must to be done by qualified Diamatic personnel, this to guarantee a safe and reliable machine. Any guarantee on the machine is expired when: ▪...
2 years from the date of delivery or, in the case of Rental Fleet Machines, 180 days from the date of assignment to a Rental Fleet. Diamatic makes this warranty only to the buyer who purchases the products directly from Diamatic or its authorized distributor.
Page 19
Diamatic for the replacement parts before they can be shipped. Once the evaluation process is complete and parts are deemed a valid warranty claim, a credit will be issued against this invoice.
Page 20
TO THE DELIVERING DISTRIBUTOR OR END USER To ensure the proper warranty coverage is extended to the owner of this machine, fill out the attached card COMPLETELY and ACCURATELY and return to Diamatic. The warranty period will start on the delivery date entered below.
Need help?
Do you have a question about the BG-300E and is the answer not in the manual?
Questions and answers
Hi we have problem with grinder BG-300E we get new computer and put it back make sure all wires looks alright but when turn on on the screen show E-08 and red led on the computer blinks can help with this troubleshooting code