Saeco GAGGIA VELASCA CMF-OTC Service Manual page 19

GAGGIA VELASCA
The coffee grounds
container full icon
remains displayed.
The brew group
cannot be removed.
The brew group
cannot be inserted.
The coffee has too
little cream or is
watery.
The coffee grounds container was
emptied while the machine was
switched off.
The coffee grounds container was
placed back too fast.
The brew group is not positioned
correctly.
The coffee grounds container is
not removed.
The machine is still in the descal-
ing process.
The brew group is not in the cor-
rect position.
The grinder is set to a coarse
setting.
The brew group is dirty.
The coffee exit duct is dirty.
03 BRIEF INSTRUCTIONS
Always empty the coffee grounds
container while the machine is ON. If
the coffee grounds container is emp-
tied while the machine is switched
off, the coffee cycle counter is not re-
set. In that case, the 'empty coffee
grounds container' message will stay
on the display even though the con-
tainer is not full.
Do not place back the coffee grounds
container until the screen message
prompts you to put it back
Close the maintenance door. Switch
the machine off and back on again.
Wait for the machine ready screen to
appear and then remove the brew
group.
Remove the coffee grounds container
before removing the brew group.
You cannot remove the brew group
when the descaling process is active.
First complete the descaling process
and then remove the brew group.
The brew group was not put in rest
position before it was placed back.
Make sure that the lever is in contact
with the base of the brew group and
that the hook of the brew group is in
the correct position.
Reset the machine by switching it on
and off. Place the drip tray and the
coffee grounds container back. Leave
the brew group out. Close the main-
tenance door and switch the machine
on and off. Then try to reinsert the
brew group.
Adjust the grinder to a finer setting.
Clean the brew group. For thorough
cleaning, follow the monthly cleaning
procedure with the degreasing tablet.
Clean the coffee exit duct thoroughly
with the handle of the multifunctional
tool or a spoon handle.
3/6