Operation - Remington 490 Operating Instructions Manual

Operation

1. Grasp muzzle and slide barrel forward rapidly until it stops.
This sets piston into firing position and opens the chamber.
2. Insert power fastener into muzzle of tool, head end first.
Push the fastener until point is even with end of tool.
ALWAYS load the fastener first, then the powder load.
NOTE:
Failure to start with
the lowest power level
can result in overdrive
condition and will re-
sult in damage to tool
(see page 13).
3. Select the proper Remington
tion Chart on pages 24 and 25) and insert into the chamber
until it stops.
4. Push barrel into housing to the closed position.
489-3
482-69
482-71
489-
® Powder Load (see Applica-
14
48
482-70
482-72
101274