Remington 490 Operating Instructions Manual page 11

Safety Precautions
6. Power fasteners are a permanently installed fixture. An
act of demolition is required for their removal. Appropriate
safety precautions must be taken.
Shank
Plastic Flute
7. NEVER use common nails or other materials as fasteners.
Remington
special steel and heat treated to produce a very hard yet
ductile fastener.
8. NEVER pry a powder load out of the chamber. Prying can
discharge the load causing serious injury (see Trouble-
shooting Guide on pages 20 and 21).
LOAD
1
9. ALWAYS insert the power fastener first, then the powder
load. If work is interrupted for any reason, ALWAYS
remove the powder load before removing the power
fastener (see page 15, item 7).
101274
G 018
Head
482-59
®
Power Fasteners are manufactured from
G 018
2
REMINGTON
489-36
UNLOAD
2
11
1
REMINGTON
489-37