Kenwood TK-6110 Instruction Manual page 13

When a signal is received while scanning, scanning will halt, the audio will
unmute, and the channel number or name will appear on the display.
If Priority is programmed, the priority channel is periodically checked for a
signal while a signal is being received on a normal channel. When a signal
appears on the priority channel, the transceiver will automatically switch to the
priority channel.
To enter carrier squelch scan, press the Monitor key while scan is in
progress.
Scrambler
If you have an optional scrambler board installed, you can press this key to
turn it ON (or OFF). When enabled, a tone sounds and the OPT icon appears
on the display. To change the scrambler code:
1 Press and hold the Scrambler key for 1 second.
• A tone sounds and CODE appears on the display with the current code.
2 Press the
3 Press the Scrambler key.
• A tone sounds and the display returns to normal.
Note: You cannot program this function onto the
Squelch Level
You can manually adjust the squelch level using this function:
1 Press the Squelch key.
• A tone sounds and SQL appears on the display with the current squelch level.
2 Press the
3 Press the Squelch key.
• A tone sounds and the display returns to normal.
Note: You cannot program this function onto the
Talk Around
Press this key to make a call without the use of a repeater. When you
activate this function, a tone sounds and tA appears on the 3-digit display.
This function is useful when you are close to the units you want to talk to.
and keys to select the desired scrambler code.
and keys to select the desired squelch level.
and keys.
and keys.
9