Table Of Contents; Specifications; General Information - Hach TitraLab AT1102 Basic User Manual

Table of contents

Specifications on page 3
General information on page 3
Installation on page 8
Keypad on page 15
Additional information
Additional information is available on the manufacturer's website.

Specifications

Specifications are subject to change without notice.
Specification
Dimensions (W x D x H)
Weight
Power requirements
Altitude
Operating temperature
Relative humidity
Storage temperature
Installation category
Pollution degree
Certifications
Warranty

General information

In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
make changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer's website.
Safety information
The manufacturer is not responsible for any damages due to misapplication or misuse of this product including,
without limitation, direct, incidental and consequential damages, and disclaims such damages to the full extent
permitted under applicable law. The user is solely responsible to identify critical application risks and install
appropriate mechanisms to protect processes during a possible equipment malfunction.
Please read this entire manual before unpacking, setting up or operating this equipment. Pay
attention to all danger and caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
Make sure that the protection provided by this equipment is not impaired. Do not use or install this
equipment in any manner other than that specified in this manual.
Startup on page 16
Standard operations
Maintenance on page 19
Troubleshooting
Details
22 x 40 x 36 cm (8.7 x 15.7 x 14.2 in.)
4 kg (8.8 lb)
100-240 VAC, 50/60 Hz
2,000 m (6,562 ft) maximum
15 to 35 °C (59 to 95 °F)
20 to 80%, non-condensing
-5 to 40 °C (23 to 104 °F)
II
2
Safety IEC/EN 61010-1; EMC IEC/EN 61326-1
1 year (EU: 2 years)
N O T I C E
on page 17
on page 22
English 3