Q3: Have A Recording/Playback Problem - Yamaha PSG-01S User Manual

Usb microphone speaker
Hide thumbs Also See for PSG-01S:
Table of Contents

Advertisement

Q3: Have a recording/playback problem

Problem
Cannot record any sounds.
Cannot record any sounds
when holding this unit.
The recording sounds are too
loud or cracking.
The recording sounds are too
small.
This unit does not output
playback sounds.
"INVALID" is displayed in the
Home tab of the PSG-01S
Controller.
20
Cause
This unit is not selected in the Audio device
settings of the PC/Mac.
The microphone is muted on this unit.
This unit is not in the Active style.
The microphone attenuator function is turned off.
The microphone attenuator function is turned on.
This unit is not selected in the Audio device
settings of the PC/Mac.
REC MIC has been pressed.
The speakers are muted on this unit.
This unit is installed incorrectly.
Remedy
Select this unit.
Turn off the microphone mute function on this
unit.
Set "Fix style" to "Active style" in the PSG-01S
Controller.
Set "Attenuator" to "ON" in the PSG-01S
Controller.
Set "Attenuator" to "OFF" in the PSG-01S
Controller.
Select this unit.
Press REC MIC again.
Turn off the speaker mute function on this unit.
Install this unit correctly. (page 7)

Advertisement

Table of Contents
loading

Table of Contents