Side Shift - Hydraulic Models; Stopping; Transport Position - McConnel 130 Operator And Parts Manual

Flail mower/shredder

Hide thumbs Also See for 130:

Table of Contents

6.4 Side shift – Hydraulic models

IMPORTANT: Ensure that the machine is lifted clear of the ground before side

moving, failure to observe this may result in damage to the frame.

IMPORTANT: During reverse movement lift the machine off the ground to

avoid damaging the machine.

• Close the arms and lower the machine to the ground.

• Disconnect the power takeoff.

• Stop the tractor, take out the starting key and apply the hand brake.

• If the ground is sloping, block the tractor wheels.

For transport it is mandatory to:

• Observe all road transport requirements and note the necessary warning signs.

• Reduce speed especially on bumpy roads, The weight of the machine may render

driving difficult and damage the machine itself.

• The power take off must be disconnected.

IMPORTANT: during transport on bumpy roads it is mandatory to move the

machine into the central position.

Table of Contents

170 190 225