ABB REF542plus Operator's Manual page 81

1MRS755869
Multifunction Protection and Switchgear Control
Unit
Operator's manual
Fig. 19.1.-1 Attempt to resetting the fault recorder in the wrong mode
Select the quantity to reset with UP
to execute.
Fig. 19.1.-2 Resetting a quantity in the proper mode
The quantities that can be reset are:
Reset alarm: can only be reset, if there is no active alarm present anymore. An
attempt to reset an alarm caused for example by an interrupted open coil is
impossible as long as the coil is not replaced.
REF542plus
and DOWN and press ENTER
A051461
A051462
81