Sharper Image Mosquito User Manual page 5

TRIMMING YOUR MOSQUITO DRONE
It may be necessary to adjust the trim (fine tune the controls) before a flight. When you
lift off your Mosquito Drone into the air, and don't use any other control levers, it should
just hover in one spot. If it doesn't, you can follow the instructions below to bring your
drone to a perfect hover.
Direction
If it drifts to the LEFT...
If it drifts to the RIGHT...
If it drifts BACKWARD...
If it drifts FORWARD...
RESETTING THE TRIM
Sometimes you will want to reset the Mosquito Drone back to its original factory trim
settings. There are two ways to do this.
Drone View
Press the Aileron trim button
Press the Aileron trim button
(left side button) until the drone
Press the Forward/Backward
Trim Button UP till the drone
Press the Forward/Backward
Trim Button Down till the drone
- 5 -
Instructions
(right side button) until the
drone stops drifting.
stops drifting.
stops flying backwards.
stops flying forwards.
Controller View