Epson ProSense J-367 User Manual page 17

J-347/367, U-350 User Manual
B
Start charging the device.
Two charging methods are available.
oUsing the AC adapter to charge the device
Connect the USB plug of the USB Charging clip to the USB port in the AC adapter and then connect the AC
adapter to an electrical outlet.
We recommend using the optional AC adapter to charge the device. Using an incompatible AC adapter may
result in failure to charge or improper operation.
oUsing a PC to charge the device
Connect the USB plug of the USB Charging clip to the USB port in the PC.
This method will not necessarily be successful with all computers. Do not use a USB hub or other
intermediate device. Connect the USB Charging clip directly to the PC.
Charging will start automatically once devices are properly connected. The typical average time to fully
charge the device is 2.5 to 3.5 hours. This can vary depending on conditions.
Note
You can use the Epson View companion application to configure initial settings from the PC while charging the device.
Visit the following website to download Epson View, create an account, and learn how to use the application to configure
the device and perform other operations.
U
https://view.epson.com/
Setup
17