Table of Contents
Advertisement
5. After purchasing
(1) Charging
Battery must be fully charged approximately for
3 hours prior to initial use.
To charge the battery, plug the supplied AC
adapter into the AC adapter jack on the
bottom of the device.
A full charge takes about 3 hours.
The battery indicator located left edge side of
the front will glow red while charging and it
will glow green when it's fully charged.
※ The unit might be getting warm while charging.
(2) Remove screen protection film
A protection film is covered on the screen. Make
sure that take it off before using the unit.
User manual – SenseView LIGHT
9
Advertisement
Table of Contents
