INSTALLATION
Blower/Fan (846-515)
1) Remove the two screws from the top of the
fan housing.
2) Slide the fan up into the rear heat shield.
3) After aligning holes, secure the fan to the rear
heat shield using the two screws removed
earlier.
CAUTION: The connection cord should not
be in contact with any hot surfaces.
Do not route cord under or in front
of unit.
Read the Fan Operation instructions before
using.
Neutral
Live
120V AC
60 Hz
Fan Thermodisc
(normally open)
WARNING: Electrical Grounding Instructions
This appliance is equipped with a three pronged
(grounding) plug for your protection against shock
hazard and should be plugged directly into a properly
grounded three-prong receptacle. Do not cut or remove
the grounding prong from this plug.
18
Green
Manual/
Ground
Auto
Switch
Black
Black
Blower/Fan Wiring Diagram
Fan
Switch
Black
Fan
Fan
CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can cause
improper and dangerous operation.
Regency Freestanding Woodstove
Ground