Remove Battery For Replacement Or Disposal - Brother PT-P710BT User Manual

Set Up Your Label Printer

Remove Battery for Replacement or Disposal

Battery Cover
CAUT I O N CAUT I O N CAUT I O N
DANGER
Do not dispose of the battery with household waste.
There is a risk of environmental damage, explosion, or fire.
a
Turn the label printer off.
b
Open the Cassette Cover.
c
Remove the two screws from the Battery Cover
using a flat-bladed screwdriver.
d
Remove the battery.
• Dispose of batteries at an appropriate collection
point. Be sure to observe all applicable local
regulations.
• When storing or discarding a battery, cover the
contacts with cellophane tape to prevent it from short-
circuiting.
e
When reinserting the battery, make sure the
battery's contacts are touching the contacts
inside the battery compartment.
f
Replace the Battery Cover, reinsert the screws,
and tighten them with a flat-bladed screwdriver.
g
Close the Cassette Cover.
2
6