Jabra Freespeak BT200 Quick Start Manual

QUICK START GUIDE

English
JA B RA
© 2003 JABRA Corporation, a GN Netcom
company. All rights reserved. Patents pending.
JABRA and the JABRA logo are registered
trademarks of JABRA Corporation in the USA and
may be registered in other countries. FreeSpeak
and MiniGel are trademarks of JABRA. Bluetooth
is a trademark owned by Bluetooth SIG, Inc. and
is used by JABRA under license. Design and
specifications subject to change without notice.
The JABRA FreeSpeak headset may not be
authorized for use in some countries.
500-00324-00
I M P O R T A N T ! R E A D T H I S F I R S T
JABRA ® FreeSpeak BT200 QUICK START GUIDE
™
For Most Bluetooth
MiniGel™
Charging
Cradle
BEFORE USING YOUR HEADSET
1 Check phone compatibility
This version of FreeSpeak is compatible with most
Bluetooth phones (version 1.1 or higher) with headset
or hands-free profile. Ensure that your phone has
Bluetooth capability by either visiting your phone
manufacturer's web site or our web site. (JABRA also
provides FreeSpeak versions for most non-Bluetooth
phones).
2 Charge FreeSpeak
FreeSpeak is rechargeable and must be charged
before use.
1
Fig.1
1
Phones
™
1. Insert the headset fully into its charging cradle.
Headset Indicator
Light (Blue LED)
2. Plug one end of the AC power adapter into the
charging cradle and the other end into an electrical
Multi-Function
Button
wall outlet.
3. Charge your headset for approximately 2 hours
or until the blue indicator light goes out.
IMPORTANT: The blue indicator light will be
Volume Control
on while charging and will turn off when charging
Button
is complete.
3 "Pair" to a Bluetooth phone
1. Ensure headset is off.
2. Press
release*.
3. Follow your Bluetooth phone's instruction guide to
start the pairing process. Typically, the steps involve
going to a "setup", "connect", or "Bluetooth" menu
and then selecting the option to "discover" a
Bluetooth device.
4. Your phone will find the "JABRA BT200" headset
and ask if you want to pair with it. Confirm this.
5. Enter passkey or PIN = 0000 (4 zeros).
IMPORTANT: If pairing was successful, the blue
indicator light will briefly flash rapidly before going
back to flashing every 3 seconds. If unsuccessful,
the light remains solid, and you'll need to reattempt
pairing (see steps 3–5 above).
* If you have a Bluetooth phone that supports
2
the hands-free Bluetooth profile, see
"Enhanced features" section for alternative
pairing instructions. Phone-specific pairing
instructions can be found online at
www.jabra.com/fscs.
until you see a solid blue light, then