Appendix; Appendix A: Default Server Settings - B&B Electronics Vlinx VESP211 Manual

Section 9 - Appendix

Appendix

Appendix A: Default Server Settings

Page 59 of 67
S
ECTION
Setting Default Value
Server Name MODEL NUMBER
Serial Number Printed on the label
Password password field is blank from factory
DHCP Enable
IP Address BASED ON DHCP SERVER
If a DHCP assignment is not available, the device will default to 169.254.102.39
Net Mask 255.255.0.0
Gateway 169.254.1.1
Firmware Version X.X.X (Current Version)
Hardware Version X.X (Current Version)
Port 1
Serial port mode RS-232
Baud Rate 9600
Data bits 8
Parity None
Stop bits 1
Flow Control None
Protocol TCP
Serial timeout 0 seconds
TCP alive timeout 0 minutes
Connection Mode Server
Delimiter HEX 1 00
Delimiter HEX 2 00
Remove delimiters Disable
Force transmit 0 ms
Inter-character timer 0 ms
Character count 0
Max connection 1
Vlinx VESP211 Serial Server
9
www.bb-elec.com/
www.bb-europe.com/