Navigating The Configuration Pages; Setting Up The Serial Server Name And Password - B&B Electronics Vlinx VESP211 Manual

Section 4 - Configuring the Serial Server
1. Double-click the row associated with the desired serial server. The
page appears.
2. Type the password into the
default.
3. Click
The

Navigating the Configuration Pages

There are two ways to move from page to page in the Vlinx Manager software:
by clicking a specific link, or by clicking
pages sequentially.
Note: Always remember to click Save before leaving a page to ensure your settings are saved.

Setting up the Serial Server Name and Password

On the
 Change the name of the serial server
 Initiate a login password change
Page 26 of 67
.
Login
General Configuration
General Configuration
box. The password is blank by
Password
Figure 20. Login Page
page appears.
or
Next
page you can do the following:
Vlinx VESR4x4 Serial Server
to move through the
Back
www.bb-elec.com/
www.bb-europe.com/
Login