Page 1
INSTALLATION INSTRUCTIONS FOR PART OESWC-CLASS2-RF OESWC-CLASS2-RF The OESWC-CLASS2-RF is designed to allow you to add steering wheel control options to 2002 and up CLASS 2 vehicles. The RF controlled OESWC-CLASS2-RF will allow the customer to adjust their radio without taking their eyes off the road. The OESWC-CLASS2-RF will come preprogrammed with your most popular features, volume up, volume down, seek up, seek down, and source.
Page 2
Mounting The RFASWC Transmitter 1. Place button pad in the OESWC transmitter with the volume up arrow (^) in the spot where you want volume up to be.(fig. 1) 2. Snap in trim ring to secure keypad in place. (fig. 2) 3.
Page 3
Wiring The OESWC Interface 1. Connect the red wire to 12 volt accessory 2. Connect the Black wire to ground (you may use the same ground that you use for the aftermarket radio) Setting Up The OESWC Transmitter 1. Press the Red and Green buttons simultaneously for 5 seconds, and then press volume up for two seconds.
Page 4
for 2 seconds. 5. This is the end of the auto detection stage. If the OESWC TRANSMITTER detected the vehicles radio successfully the led will light up solid red. 6. Make sure the steering wheel control buttons function correctly in the vehicle and enjoy your radio.