Easy@Home EHQH15W User Manual page 8

Chapter 2 - Safety
13. DO NOT insert foreign objects into the air intake or air outlet, as this may cause electrical
shock, fire or damage to the unit.
14. To prevent a possible fire, DO NOT block the air intake or air outlet in any way. DO NOT
use the unit on soft surfaces, such as a bed, where the openings may become blocked.
Always use on a dry level surface. Only use the heater on the floor.
15. In order to prevent overheating and the risk of fire, DO NOT cover the appliance while it
is functioning.
16. The internal parts of the heater become very hot and cause sparking spots inside during
operation. DO NOT use this unit in an area where gasoline, paints or other flammable
liquids are used or stored. Keep this unit away from heated surfaces and open flames.
17. Use this heater only as described in this manual. Any other use not indicated by the
manufacturer may result in fire, electric shock or injury. The use of attachments not
recommended or sold by the manufacturer may result in fire, electric shock or injury.
18. Ensure no other appliance is plugged into the same outlet or into another outlet wired
into the circuit.
19. It is normal for the plug and cord to feel warm to the touch. An excessively hot or
deformed plug or cord is not normal and may be the result of a defective electrical outlet.
Defective outlets must be replaced before using the heater. Plugging the heater into a
worn outlet may result in overheating of the power cord or may cause a fire. Make sure
that the plug is fully inserted into the outlet. Wall outlets may deteriorate in time so check
the plug periodically for signs of overheating. Check that neither the appliance nor the
power cords have been damaged during shipping.
20. DO NOT attempt to repair or adjust any electrical or mechanical malfunction on this unit;
doing so will void your warranty. Only a service agent or licensed and qualified profes-
sional should perform any servicing.
21. DO NOT use this appliance with an extension cord or outlet strip. Connect the appliance
directly to a properly grounded outlet.
22. Make sure that there is no styrofoam or other packaging material remaining in the unit.
23. The first time the heater is used, run it at the maximum power for at least two hours. During
this time, ventilate the room thoroughly to eliminate the new smell released by the unit. It
is completely normal for the unit to emit cracking sounds the first time it is used.
24. Use extreme caution whenever the heater is left operating unattended.
25. DO NOT open the unit. The heater contains no user serviceable parts inside.
8
cshelp@mcappliance.com
MODEL: EHQH15W PRODUCT CODE: 40186-14 12/2014
Infrared quartz heater
AFTER SALES SUPPORT
888 775 0202