Table of Contents
Advertisement
Infrared quartz heater
FAQ
Troubleshooting
Problem
Will not operate or turn on - Unplug the unit and make sure the heater is placed in an
Cleaning
•
It is recommended to clean the unit at least once a month and before off-season storage.
•
Before cleaning, be sure the unit is turned off and unplugged.
•
Clean the heater with a vacuum brush; this will remove lint and dirt from the inside of the
heater.
•
DO NOT immerse the heater in water.
•
Never use gasoline, benzene or thinner. This will damage the surface of the heater.
•
To clean external surfaces, only use a dry cloth. DO NOT use water, polish or any
chemical solution.
Maintenance and Storage
•
Store the heater in a cool and dry location with power cord properly secured.
•
Please store the unit in its original carton or other suitable container.
•
Turn the power switch in the back of the unit off.
•
Unplug the unit and let it cool completely.
•
If you do not use the heater for long periods of time, please take out the remote
batteries. Store the batteries in a safe place.
AFTER SALES SUPPORT
888 775 0202
upright position.
- Check for obstructions. If you find an obstruction, turn the
heater OFF and unplug the unit. Carefully remove the
obstruction.
- Make sure Mode Control is on the Low or High setting.
* DO NOT attempt to open or repair the heater.
MODEL: EHQH15W PRODUCT CODE: 40186-14 12/2014
Chapter 5 - FAQ
Solutions
cshelp@mcappliance.com
13
Hide quick links:
Advertisement
Table of Contents
