Kia LAN-8660EK Owner's Manual page 16

Bluetooth operation
6. In an initial connection, the user will see the "INPUT PIN
CODE" screen as shown in the figure.
To successfully connect, make sure to enter the same PIN
code for the mobile phone and the unit.
7. Touch the number 0~9 buttons, then confirm.
8. Touch the "Enter" button to complete the pairing.
9. The Bluetooth phone will be registered once successfully
connected. The user can confirm with the
mark in the "CONNECT PHONE" screen.
Notes
• The
icon will be displayed on the upper right side of the
"PHONE" screen once successfully connected.
• The
icon is displayed with hands-free connections.
Refer to "Headset functionality" for headset connections.
• Icon for hands-free connections
• Icon for headset connections
Auto connection
1. A Bluetooth phone with a previous record showing that it
has successfully connected will automatically start the
connecting process when starting a car.
2. The Auto connection function operates if there is a
registered mobile phone in the "CONNECT PHONE"
screen and the "Auto Connection" is selected on the
"PHONE SETUP" screen.
3. To cancel, touch the "STOP" button.
Notes
• Auto connection operates continuously from the recently
connected mobile phone (from the top of the list on the
"CONNECT PHONE" screen)
• The Auto connection process will take about 20 seconds for
each mobile phone. (e.g. for 5 registered mobile phones,
100 seconds maximum)
16
checking