Sva05Lp Low Pressure Isolation Valve Assembly - Sage SIP Operation And Instruction Manual

O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
SVA 05 LP Low Pressure Isolation Valve Assembly
HANDLE IN CLOSED POSITION
5.5"
without
threadolet
6.5"
with
threadolet
NOTES AND CAUTIONS
• Suitable for low pressure Air or Natural Gas applications
(maximum 50 PSIG)
• Assumes 1 ⁄ " Insertion Probe inserted to center of a Pipe
2
(see Sage Probe Insertion Guidelines)
• Teflon Ferrule permits ease of Probe insertion or removal
• Exercise caution when loosening Ferrule nut during
insertion and removal of Probe, since this model has no
Safety Chain
• Note, maximum upward force is 20% of pipe pressure
(i.e., 10 Lbs with 50 PSIG)
• The Assembly will be shipped with a plastic sleeve that
protects the 3/4" pipe nipple
• It is the Customer's responsibility to weld a Female Threadolet
with correct diameter to pipe
Teflon Ferrule
316SS Compression Fitting
" "
1/2 -3/4 Brass Adaptor
3/4" Brass Full Port Ball Valve
Valve Handle
" "
316SS 3/4 x 1-1/2 Pipe Nipple
Customer
Supplied Threadolet
S A G E M E T E R I N G , I N C .
HANDLE IN OPEN POSITION
39
7.00"
with
threadolet
8.00"
with
threadolet
REV. 16-SIP/SRP