Download Print this page

Important Safety Information - Greenlee 724 Instruction Manual

Bx stud punch

Advertisement

IMPORTANT SAFETY INFORMATION

This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for
preventing or avoiding the hazard.
Immediate hazards which, if not avoided, WILL
result in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information in
this manual before operating or
servicing this tool.
Failure to observe this warning can
result in severe injury or death.
Greenlee Textron / Subsidiary of Textron Inc.
724 BX Stud Punch
SAFETY
ALERT
SYMBOL
KEEP THIS MANUAL
Electric shock hazard:
This tool is not insulated. Contact
with live circuits can result in severe
injury or death.
Wear eye protection when using
this tool.
Failure to wear eye protection can
result in serious eye injury from
flying debris.
Do not add extensions (cheaters) to the handles.
Using excessive force can result in injury or damage
to the tool. If excessive force is required to complete
a punch, verify that the type and thickness of
material do not exceed the capacity of the tool.
• Inspect the tool prior to use. Replace worn,
damaged, or missing components with Greenlee
replacement parts. A damaged or improperly
assembled tool can break.
• Use this tool for the manufacturer's intended
purpose only. Use other than that which is
described in this manual can result in injury or
damage to the tool.
Do not use tool on heavier than 20 gauge mild steel.
Note: Keep all decals clean and legible, and replace
when necessary.
2
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070

Advertisement

loading