Preparing for Installation
Preparing for Installation
Safety
Warnings
Warning
Warning
Warning
Warning
Cisco 836 Router and SOHO 96 Router Hardware Installation Guide
2-28
This section provides information on safety, mounting of the router, and
unpacking of the router box.
This section provides safety warnings and electrostatic and router damage
information for the Cisco 836 and Cisco SOHO 96 routers.
Before installing the router, read the following warnings:
Only trained and qualified personnel should be allowed to install or replace this
equipment.
Read the installation instructions before you connect the system to its power
source.
Before working on a system that has a standby/off switch, turn off the power
switch to standby and unplug the power cord.
Before working on equipment that is connected to power lines, remove jewelry
(including rings, necklaces, and watches). Metal objects will heat up when
connected to power and ground and can cause serious burns or weld the metal
object to the terminals.
Chapter 2
Installation
78-15281-02