Storage - RedMax HEZ2601F Owner's/Operator's Manual

Redmax stick edger owner/operator manual

Table of Contents

MA9

MA10

English

9. Maintenance

■ PROPECTOR

• When you replace protector, use new bolt (T3207-

24130). (MA9)

Tightning Torque: 35~52in-lbs(4.0~6.0N.m.)

■ PROCEDURES TO BE PERFORMED AFTER

EVERY 100 HOURS OF USE

1. Remove the muffler, insert a screwdriver into the

vent, and wipe away any carbon buildup. Wipe away

any carbon buildup on the muffler exhaust vent and

cylinder exhaust port at the same time.

2. Tighten all screws, bolts, and fittings.

3. Check to see if any oil or grease has worked its way

in between the clutch lining and drum, and if it has

wipe it away using oil-free, lead-free gasoline.

English

10. Storage

• Aged fuel is one of major causes of engine starting

failure. Before storing the unit, empty the fuel tank

and run the engine until it uses all the fuel left in the

fuel line and the carburetor. Store the unit indoor

taking necessary measures for rust prevention.

Table of Contents