Johansson 8200 User Manual page 26

HDMI Modulator
The display shows:
Selection of Advanced Stream / Section "Rtrv Status"
In the "Rtrv Status" (Retrieve Status) section you can read 13 parameters: Service ID, CH
Name, CH Number(LCN), PMT PID, PCR PID, Video PID, Audio PID, OrgNetwork ID, Network ID,
Network Name, Network Ver., Private Data and TS ID.
The last screen
displayed was:
(REF. 8200)
There are 5 digits that you can change.
When turning the rotary button you select the digit you want to
change. The cursor indicates which digit will be changed.
Push the rotary button to edit the digit which is situated above
the cursor. This character starts to blink.
Turn the rotary button to select your character.
You can select between 0 and 9.
Push the button to stop your modification.
Turn the rotary button to select the next digit and edit the
character as described above.
When you have the TS ID of your choice, turn the rotary button
clockwise and the cursor will move to the right. You come
automatically in the next screen:
Push the rotary button to confirm.
Turn the rotary button to see
26