Advanced Rf Output - Johansson 8200 User Manual

HDMI Modulator

Advanced RF Output

Selection of Advanced RF Output / Section "Setup RF Output"
In the "Setup RF Output" section you can edit 4 parameters: the carrier, the constellation, the
FEC and the Guard Interval.
Normally the display
shows:
(REF. 8200)
Note: the frequency shown here can be different of the
frequency of your choice.
Push the rotary button, and
turn the rotary button until you see
Push the rotary button. The display shows:
Push the button. The display shows:
Under the "Setup RF Output" section we can change 4
Push the rotary button. The display will show the 1
Push the rotary button again to edit the carrier,
a star appears in the top right corner of the display:
Turn the rotary button to select the carrier: 2K or 8K.
Push the rotary button to confirm.
Turn the rotary button to select the 2
parameters.
The carrier is 2K or 8K.
parameter:
st
parameter:
nd
10