Johansson 8200 User Manual page 25

HDMI Modulator
The display shows:
Selection of Advanced Stream / Section "Set TS ID"
In the "Set TS ID" section you can edit the TS ID parameter.
The last screen
displayed was:
(REF. 8200)
Push the rotary button to edit the digit which is situated above
the cursor. This character starts to blink.
Turn the rotary button to select your character.
You can select between 0 and 9 and A-F. This means the
character you see is a hexadecimal character.
Push the button to stop your modification.
Turn the rotary button to select the next digit and edit the
character as described above.
When you have the Private Data ID of your choice, turn the
rotary button clockwise and the cursor will move to the right. You
come automatically in the next screen:
Push the rotary button to confirm.
Turn the rotary button to see the Stream / Set TS ID display:
Push the rotary button to display:
Push the rotary button again to edit the TS ID.
When in edit mode, a star appears in the top right corner of the
display and a cursor appears under the first character of the
second row of the display:
25