Johansson 8200 User Manual page 13

HDMI Modulator
Selection of Advanced RF Output / Section "Advanced"
In the "Advanced" section you can edit 2 parameters: the Frequency Offset and the RF
Output mode.
Normaly the display
shows:
(REF. 8200)
Turn the rotary button to see
Push the rotary button. The display shows the 1
Push the rotary button again to edit the Frequency Offset,
a star appears in the top right corner of the display:
Turn the rotary button to select the Frequency Offset mode:
No Offset, -500K, -375K, -250K, -125K, +125K, +250K, +375K or +500K
Push the rotary button to confirm.
Turn the rotary button to see the 2
Push the rotary button again to edit the RF Output,
a star appears in the top right corner of the display:
Turn the rotary button or enable or disable the RF Output.
Push the rotary button to confirm.
Turn the rotary button to go back to the "Advanced" screen:
(K = kHz).
parameter:
nd
parameter:
st
13