LG T2313SSAV Owner's Manual page 39

Symptoms
UE rebalancing operation is not
successful.
The load is too small.
Heavy articles are mixed with lighter
items.
The load is out of balance.
Control error.
Water level is too high due to a faulty
water valve.
The water level sensor is not working
correctly.
A motor error has occurred.
Clutch error.
Tub clean Alarm.
Sensor for cloth-sensing is defective.
Motor's revolution is too low.
Contact-point of Connector is
defective.
Reason Solution
• The automatic attempt to rebalance the
load was not successful. The cycle has
been paused to allow the load to be
manually adjusted.
• Add more items to allow the washing
machine to balance the loads.
• Wash articles of somewhat similar
weight.
• Manually redistribute the load if articles
have become tangled.
• Unplug the washing machine and wait
60 seconds. Reconnect power and try
again. If the error code is not released,
call for service.
• Close the water taps, unplug the
washing machine, and call for service.
• Close the water taps, unplug the
washing machine, and call for service.
• Allow the washing machine to stand for
30 minutes and then restart the cycle.
If the error code is not released, call for
service.
• Unplug the washing machine and call
for service.
• Run the Tub Clean programme.
• Manually redistribute the load if articles
have become tangled.
• Unplug the washing machine and wait
60 seconds. Reconnect power and try
again.
EN
39