Cleaning The Water Inlet Filter; Cleaning The Drain Pump Filter - LG T2313SSAV Owner's Manual

Cleaning the Water Inlet Filter

• Turn off the supply taps to the machine if the
washing machine is to be left for any length of
time (e.g. holiday), especially if there is no floor
drain (gully) in the immediate vicinity.
• ' ' error message will be displayed on the
control panel when water is not entering the
detergent drawer.
• If water is very hard or contains traces of lime
deposit, the water inlet filter may become
clogged. It is therefore a good idea to clean it
occasionally.
1
Turn off the water tap and unscrew the water
supply hose.
2
Clean the filter using a hard bristle brush.
32
Cleaning the Drain Pump
Filter
• The drain filter collects threads and small
objects left in the laundry. Check regularly that
the filter is clean to ensure smooth running of
your washing machine.
• Empty all the water from the tub by running a
spin only cycle for a few minutes then unplug
the machine off from the power outlet socket.
1
Turn the cap on the rear of the machine
counter-clockwise and pull it out.
2
Remove any foreign objects and fluff inside
pump casing and from the filter.
3
Replace the cap. Insert the filter along the
guide ribs inside the pump casing. Filter
must face the guide ribs inside pump casing
and securely turn the cap clockwise.
CAUTION
• Be careful when draining, as any residual
water may be hot.
EN