Basic Operation - Panasonic VL-V900 Quick Reference Manual

Basic operation

Enter the room number with the keypad → {
Other operation
At the lobby station
Searching by first letter of the name
1 Press { } → use the keypad to enter the first letter of the resident's name.
2 Press { } or { } to search for the desired name.
3
Press { } to call.
Opening the door by entering an unlock code
1
Press {#} → enter the 4-digit unlock code.
L For information about the unlock code, please contact your building manager.
2 Press { } to unlock.
Switching the image displayed on the main monitor
While talking to the main monitor, press {#} to switch the image displayed on the main monitor from the lobby
station to the camera. To return to the lobby image, press { }.
At the main monitor
Monitoring the lobby station or camera image
1
→ select the desired destination →
Press
L If a camera is connected to the lobby station, you can alternate monitoring between the lobby station and
camera by pressing
Opening the door
You can open the lobby door while talking or monitoring the lobby station image. Press
Calling the PBX extension
1
Press { } → select the desired destination →
Please note the following system conditions and limitations.
L Only one call or monitoring session can be handled at a time.
Low priority: Monitoring
Medium priority: General calls (lobby station to main monitor, main monitor to PBX extension, etc.)
High priority: Emergency calls
L All calls and monitoring sessions are disconnected after the pre-programmed "timeout" time elapses.
L Following features are not available for the lobby station:
– Zoom position settings
– Wide/Zoom settings
– Doorphone connection settings
L In order to perform the above operations, optional devices and configuration for those devices are required.
Contact your building manager for more information.
or Lobby .
Camera
When the ringer tone is heard, press {TALK}.
}.
L Confirm the caller before answering.
.
.
to open the door.